Clopay’s aluminum full-view doors are ideal for commercial buildings requiring visibility, access to natural lighting and a modern look. They’re a great choice for applications ranging from restaurants and fire stations to car dealerships. These overhead doors come with an aluminum frame construction and also come in solid aluminum if privacy is preferred. You can also customize your door with a wide variety of window, color, design and performance options.

Model

ThicknessSpacingR-ValueU-FactorMax Width*Max Height*
9042-1/8″Equal width & spacing24’2″20’0″
904U***2-1/8″Equal width & spacing3.8**0.7320’2″20’0″
905/9062-1/8″Minimal stiles22’2″16’0″
905U/906U***2-1/8″Minimal stiles20’2″16’0″

*Maximum Width and Height values listed are Standard sizing.

**With insulated low-e argon filled glass

***With Clopay’s proprietary polyurethane Intellicore insulation.

Tested door U-factor is in accordance with DASMA 105

Glass Panel Options

Full-View (904)

Solid Aluminum (904)

Full-View (905/906)

Solid Aluminum (905/906)

Glazing Material Options (904/904U)

Clear Glass

5/16″ Clear Laminated Impact-Rated Glass**

Gray Tinted Glass

Bronze Tinted Glass

Obscure Glass

White Laminate Glass*

Black Laminate Glass*

Frosted Glass Or Acrylic

Gray Acrylic

White Acrylic

Clear Polycarbonate

Bronze Polycarbonate

Mirrored Glass*

Clear Acrylic

Aluminum Panel (Color Matched)

*Mirrored and laminate not available in 1/2″

Glass options above only available on full-view sections. Glass thickness available in 1/8″, 1/4″ and 1/2″. Tri-wall polygal thickness available in 5/8″. Low-E available on insulated glass.

**Available in 904W8/904UW8 only

Glazing Material Options (905/905U)

Frosted Acrylic

Clear Acrylic

Gray Acrylic

White Acrylic

Black Acrylic

Aluminum Panel (Color Matched)

Hardcoated Acrylic options available

Thickness is 1/8″

Glazing Material Options (906/906U)

Clear Tempered Glass

Gray Tinted Tempered Glass

Bronze Tinted Tempered Glass

Tempered Mirrored Glass

Tempered Obscure Glass

Aluminum Panel (Color Matched)

Low E glass available

Glass thickness available in 1/8″, 1/4″ and 1/2″

Color Options

Clear Aluminum (Anodized)

Standard White

Bronze (Painted)

Chocolate (Painted)

Bronze Anodized*

Black (Anodized)*

Dark Bronze Anodized*

*Additional cost and lead time may apply. The use of “Bronze (Painted)” is recommended due to slight color variation that may occur during the anodizing process.

Custom powder coat, Color Blast®, and anodized finishes available.

Premium finishing options include:
  • RAL color powder coat
  • 187 different powder coat offerings
  • Custom Colors with Color Blast® Garage Door Paint System
  • Bronze, dark bronze, black or custom color anodized finishing
Performance Options Available

Double-end hinge

3″ track

High performance hardware features 10 gauge end hinges, heavy-duty top bracket and 3″ sealed roller with 5/8″ stem

Exhaust port can be cut into any type of solid sectional door. Available in select sizes.

WindCode® reinforcement available up to W8 design pressure (DP) 52 PSF, depending on door configuration. Doors tested 50% greater than DP.

25,000, 50,000 or 100,000 cycle springs available.

Model 904/904U, 905/905U, 906/906U
Exterior Skin Pattern: Recessed aluminum panel
Exterior Aluminum Gauge: 6063-T5 Aluminum
Rails and Stiles: Polyurethane Insulated (904U, 905U, 906U only)
Colors: Clear Aluminum (Anodized), Standard White, Bronze (Painted), Chocolate (Painted), Bronze (Anodized), Dark Bronze (Anodized)
Limited Warranty: 5-Year Finish / 1-Year Material and Workmanship / 1-Year Hardware

Reinforcing fin included on doors wider than 14’. Doors 12’ and under do not use built-in reinforcing fin. Usage on widths 12’2” to 14’ depend upon glass weight. WINDCODE® doors may vary.

Made of 2-1/8” durable commercial grade aluminum, making it virtually maintenance-free and long-lasting.

Insulated models made of 2-1/8″ durable commercial grade aluminum with polyurethane insulation

Tongue-and-groove with integral joint seal for further reduction of air and water infiltration.

Smooth flat frame edge design for a more contemporary look.

Model
BIM
Shop Drawing
Specs
Installation Manual
Warranty
Brochure Model 905/905U/906/906U

Models 905 and 906 aluminum full-view doors boast a sleek panel design with fewer lines and angles.

904 Brochure

Model 904 and 904U’s design-forward look is enhanced with well-balanced stile profiles and contemporary lines.

Commercial Hardware

Commercial doors are designed with hardware to meet demanding applications of commercial building usage. All commercial doors are provided with the following hardware as standard. For additional upgraded hardware, take a look at Options.

  • 14 gauge hinges
  • Commercial 10 ball steel rollers with options for nylon tire rollers
  • 10,000 cycle torsion springs
  • Steel step plate and lift handle for easy operation
  • Inside slide lock for increase security
  • Galvanized aircraft cables with 7:1 safety factory
  • 2” or 3” track in a variety of configurations to meet building design requirements
Commercial Track Applications

In commercial settings, space utilization and space constraints are important factors in choosing the correct hardware configuration for your application. Clopay track offerings and options enable you to make the most efficient use of available space. Options include standard lift, low head room front or rear mount, follow the roof pitch, full vertical or combination of these options.

Commercial Torsion Springs

Designed to counterbalance even the largest doors, commercial torsion spring assemblies can be designed for Industry standard 10,000 cycles or can be upgraded to 25,000, 50,000 or 100,000 expected life cycles.